Prophet-6 Factory Sounds

Prophet-6-OS   P6Module
Prophet-6 Factory Program Banks

The sidebar at the right contains two downloadable files. The first is all of the factory program banks for the Prophet-6. The second is the set of 16 alternative tunings included with the Prophet-6. Each of these downloads includes installation instructions. These are also given below.

The program data is in a MIDI System Exclusive (SysEx) file. You will need a DAW, MIDI utility, or other application capable of opening and sending MIDI System Exclusive (SysEx) messages. MIDI-OX (Windows) and SysEx Librarian (Mac OS) are shareware MIDI utilities that can reliably be used to update DSI instruments. You will also need either a USB cable (Type A to Type B connectors, like a typical USB printer cable) or a MIDI interface and cable to transmit the SysEx file from your computer to the Prophet-6.

You will find instructions for updating using MIDI-OX and SysEx Librarian below.

IMPORTANT NOTE

Be aware that loading the factory programs overwrites any user programs that are currently in memory. If you have programs you want to keep, be sure to save them to a SysEx file first. Refer to the manual for more information about initiating a SysEx dump from the Prophet-6’s front panel controls.


LOADING PROGRAMS FROM WINDOWS USING MIDI-OX

Before starting, close all other audio or MIDI or DAW software, and disconnect all other MIDI devices. If necessary, download and install MIDI-OX.

http://www.midiox.com/

To prepare the Prophet-6 to receive system exclusive messages:
  1. Press the Globals button once.
  2. Press program selector #8 (MIDI Sysex).
  3. Use the Bank and Tens buttons to choose either USB or MIDI depending on your preferred method and connections. If you’re using USB from your computer, choose “USB.” If you’re using a MIDI interface, choose “MIDI” (the display shows MIDI as “nid”).
  4. Press the Globals button twice to exit the Global menu.

Connect your computer to the Prophet-6 using either a USB cable or a MIDI interface.

If using USB, the Prophet-6 is a Class Compliant USB device. That means it does not require any additional drivers to be installed to communicate with your computer. It will appear in MIDI-OX and other MIDI applications as a MIDI port named “Prophet-6.” (Under Windows XP, it will appear as “USB Audio Device.”)

If using a MIDI interface, connect the computer’s MIDI out to the Prophet-6’s MIDI in. Depending on the type of interface, you may also need a MIDI cable.

To load the programs:

  1. Run MIDI-OX.
  2. From the Options menu, choose “MIDI Devices.”
  3. In the lower left quadrant of the window, select the MIDI port to which the instrument is connected. If connected via USB, choose “Prophet-6” (or “USB Audio Device” under Windows XP). If connected via MIDI, choose the MIDI interface. The selected MIDI port appears in the Port Mappings window.
  4. Click OK to close the dialog and save the settings.
  5. From the View menu, choose “SysEx.”
  6. From the SysEx menu, choose “Configure.”
  7. Set the Low Level Output Buffers “Num” and “Size” to 1024.
  8. Under Output Timing, make sure that “Auto-adjust Buffer Delays if necessary” is NOT enabled.
  9. Click OK to close the dialog and save the settings.
  10. From the Command Window menu, choose “Load File.” Browse to and open the Prophet-6 programs file.
  11. From the Command Window menu, choose “Send SysEx.” The programs will increment on the Prophet-6 as each program file is transferred to it.

LOADING PROGRAMS FROM A MAC USING SYSEX LIBRARIAN

Before starting, close all other audio or MIDI or DAW software, and disconnect all other MIDI devices. If necessary, download and install SysEx Librarian.

www.snoize.com/sysexlibrarian

To prepare the Prophet-6 to receive system exclusive messages:

  1. Press the Globals button once.
  2. Press program selector #8 (MIDI Sysex).
  3. Use the Bank and Tens buttons to choose either USB or MIDI depending on your preferred method and connections. If you’re using USB from your computer, choose “USB.” If you’re using a MIDI interface, choose “MIDI” (the display shows MIDI as “nid”).
  4. Press the Globals button twice to exit the Global menu.

Connect your computer to the Prophet-6 using either a USB cable or a MIDI interface.

If using USB, the Prophet-6 is a Class Compliant USB device. That means it does not require any additional drivers to be installed to communicate with your computer. It will appear in SysEx Librarian, the Mac’s Audio MIDI Utility, and other MIDI applications as a MIDI port named “Prophet-6.”

If using a MIDI interface, connect the computer’s MIDI out to the Prophet-6’s MIDI in. Depending on the type of interface, you may also need a MIDI cable.

To load the programs:

  1. Run SysEx Librarian.
  2. Choose your MIDI interface from the “Destination” menu.
  3. Click Add/+ to add the file to the file list or simply drag and drop the file on the open SysEx Librarian window. The file name appears in the file list and should be highlighted.
  4. Click Play. The programs will increment on the Prophet-6 as each program file is transferred to it.