DSM01 Power Cable Orientation


When installing the DSM01 Curtis Filter into your modular synthesizer, make sure that the power cable is oriented correctly.

The power cable’s orientation is indicated on the PCB with the words “Red Stripe” and an arrow pointing toward the pins. A protection circuit protects the module from damage in the event the power cable is plugged in backwards.

Click the photos below to enlarge and view them.

DSM01_power_cable_1DSM01_power_cable_2

PROP 65 WARNING

Some of our products can expose you to chemicals including BPA, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

Though independent laboratory testing has certified that our products are several orders of magnitude below safe limits, it is our responsibility to alert you to this fact and direct you to https://www.p65warnings.ca.gov for more information.