The downloadable “Factory” file below contains all of the factory program banks for the Prophet ’08 keyboard and desktop module. it also includes the installation instructions given below. The program data is in a MIDI System Exclusive (SysEx) file that can be loaded into the Prophet ’08 via MIDI using a MIDI utility or other application capable of opening and transmitting SysEx files. The simplest method may be to use a shareware MIDI utility such as SysEx Librarian (Mac OS) or MIDI-OX (Windows).
These can be downloaded from:
http://www.snoize.com/SysExLibrarian/
You will also need a MIDI interface to connect your computer to the Prophet ’08.
There is nothing you need to do to prepare the Prophet ’08 to receive the programs. Once the transfer begins, the programs will automatically be written to the Prophet ’08’s memory.
Be aware that loading programs overwrites any programs that are currently in memory. If you have programs you want to keep, be sure to save them to a SysEx file first. Refer to the manual for more information about initiating a SysEx dump from the Prophet ’08’s front panel controls.
Before starting, close all other audio or MIDI or DAW software, and disconnect all other MIDI devices. If necessary, download and install MIDI-OX.
Connect the MIDI out of your computer’s MIDI interface to the Prophet ’08’s MIDI in. Depending on the type of MIDI interface, you may also need a MIDI cable to connect the interface to Prophet ’08.
To load the programs:
When the transmission completes, you’re done!
If the load fails to start, make sure the Prophet ’08 is actually receiving MIDI data. On the MIDI Channel page of the Global menu, a dot blinks between “MIDI” and “Channel” when MIDI data is received. Also, make sure that MIDI SysEx in the Global menu is set to “On.”
Before starting, close all other audio or MIDI or DAW software, and disconnect all other MIDI devices. If necessary, download and install SysEx Librarian.
http://www.snoize.com/SysExLibrarian/
Connect the MIDI out of your computer’s MIDI interface to the Prophet ’08’s MIDI in. Depending on the type of MIDI interface, you may also need a MIDI cable to connect the interface to Prophet ’08.
To load the programs:
When the transmission completes, you’re done!
If the load fails to start, make sure the Prophet ’08 is actually receiving MIDI data. On the MIDI Channel page of the Global menu, a dot blinks between “MIDI” and “Channel” when MIDI data is received. Also, make sure that MIDI SysEx in the Global menu is set to “On.”
Some of our products can expose you to chemicals including BPA, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Though independent laboratory testing has certified that our products are several orders of magnitude below safe limits, it is our responsibility to alert you to this fact and direct you to https://www.p65warnings.ca.gov for more information.