Web Store Login
Shop

Pro 2 Factory Program Banks

 

The downloadable sound bank file below contains all of the factory program banks for the Pro 2. It also includes the installation instructions given below. The program data is in a MIDI System Exclusive (SysEx) file. You will need a DAW, MIDI utility, or other application capable of opening and sending MIDI System Exclusive (SysEx) messages. MIDI-OX (Windows) and SysEx Librarian (Mac OS) are shareware MIDI utilities that can reliably be used to update DSI instruments. You will also need either a USB cable (Type A to Type B connectors, like a typical USB printer cable) or a MIDI interface to transmit the SysEx file from your computer to the Pro 2.

You will find instructions for updating using MIDI-OX and SysEx Librarian below.

 

IMPORTANT NOTE

 

Be aware that loading programs overwrites any programs that are currently in memory. If you have programs you want to keep, be sure to save them to a SysEx file first. Refer to the manual for more information about initiating a SysEx dump from the Pro 2’s front panel controls.

Factory Sound Banks
Alternate Tunings
Sound List

LOADING PROGRAMS FROM WINDOWS USING MIDI-OX

 

Before starting, close all other audio or MIDI or DAW software, and disconnect all other MIDI devices. If necessary, download and install MIDI-OX.

http://www.midiox.com/

 

To prepare the Pro 2 to receive system exclusive messages:

 

  1. Press Global.
  2. From the Global menu, select “MIDI Sysex Enable” and make sure it’s set to “On.”
  3. From the Global menu, select “MIDI Sysex Cable.”
  4. If you’re using USB, choose “USB.” If you’re using a MIDI interface, choose “MIDI.”
  5. Press Global again to exit the Global menu.

 

Connect your computer to the Pro 2 using either a USB cable or a MIDI interface.

If using USB, the Pro 2 is a Class Compliant USB device. That means it does not require any additional drivers to be installed to communicate with your computer. It will appear in MIDI-OX and other MIDI applications as a MIDI port named “Pro 2.” (Under Windows XP, it will appear as “USB Audio Device.”)

If using a MIDI interface, connect the computer’s MIDI out to the Pro 2’s MIDI in. Depending on the type of interface, you may also need a MIDI cable.

Most MIDI interfaces or sound cards with built-in MIDI interfaces will work. However, we have received reports that Digidesign/Avid interfaces and Native Instruments Maschine may not transmit SysEx correctly for updates. The M-Audio Uno is an inexpensive, reliable, and widely available MIDI interface for use when updating our instruments.

 

To load the programs:

 

  1. Run MIDI-OX.
  2. From the Options menu, choose “MIDI Devices.”
  3. In the lower left quadrant of the window, select the MIDI port to which the instrument is connected. If connected via USB, choose “Pro 2” (or “USB Audio Device” under Windows XP). If connected via MIDI, choose the MIDI interface. The selected MIDI port appears in the Port Mappings window.
  4. Click OK to close the dialog and save the settings.
  5. From the View menu, choose “SysEx.”
  6. From the SysEx menu, choose “Configure.”
  7. Set the Low Level Output Buffers “Num” and “Size” to 1024.
  8. Under Output Timing, make sure that “Auto-adjust Buffer Delays if necessary” is NOT enabled.
  9. Click OK to close the dialog and save the settings.
  10. 1From the Command Window menu, choose “Load File.” Browse to and open the Pro 2 programs file.
  11. 1From the Command Window menu, choose “Send SysEx.” The programs will increment on the Pro 2 as each program file is transferred to it.

LOADING PROGRAMS FROM A MAC USING SYSEX LIBRARIAN

 

Before starting, close all other audio or MIDI or DAW software, and disconnect all other MIDI devices. If necessary, download and install SysEx Librarian.

www.snoize.com/sysexlibrarian

 

To prepare the Pro 2 to receive system exclusive messages:

 

  1. Press Global.
  2. From the Global menu, select “MIDI Sysex Enable” and make sure it’s set to “On.”
  3. From the Global menu, select “MIDI Sysex Cable.”
  4. If you’re using USB, choose “USB.” If you’re using a MIDI interface, choose “MIDI.”
  5. Press Global again to exit the Global menu.

 

Connect your computer to the Pro 2 using either a USB cable or a MIDI interface.

If using USB, the Pro 2 is a Class Compliant USB device. That means it does not require any additional drivers to be installed to communicate with your computer. It will appear in SysEx Librarian, the Mac’s Audio MIDI Utility, and other MIDI applications as a MIDI port named “Pro 2.”

If using a MIDI interface, connect the computer’s MIDI out to the Pro 2’s MIDI in. Depending on the type of interface, you may also need a MIDI cable.

Most MIDI interfaces or sound cards with built-in MIDI interfaces will work. However, we have received reports that Digidesign/Avid interfaces and Native Instruments Maschine may not transmit SysEx correctly for updates. The M-Audio Uno is an inexpensive, reliable, and widely available MIDI interface for use when updating our instruments.

 

To load and update the OS:

 

  1. Run SysEx Librarian.
  2. Choose your MIDI interface from the “Destination” menu.
  3. Click Add/+ to add the file to the file list or simply drag and drop the file on the open SysEx Librarian window. The file name appears in the file list and should be highlighted.
  4. Click Play. The programs will increment on the Pro 2 as each program file is transferred to it.

PRO 2 SUPPORT

Register Instrument
Submit Support Ticket
User Forum
Videos
Documentation
Sounds
Operating System
Software Editor

PROP 65 WARNING

Some of our products can expose you to chemicals including BPA, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

Though independent laboratory testing has certified that our products are several orders of magnitude below safe limits, it is our responsibility to alert you to this fact and direct you to https://www.p65warnings.ca.gov for more information.